ADVANCED SETUP
This unit has additional menus that are displayed in the front panel display. The ADVANCED SETUP menu offers additional operations to adjust and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment.
Using ADVANCED SETUP
1Press MASTER ON/OFF on the front panel to release it outward to the OFF position to set this unit, Zone 2 and Zone 3 to the standby
mode.
MASTER
ON 
OFF 
2Press and hold STRAIGHT (EFFECT) on the front panel and then press MASTER ON/OFF inward to the ON position to turn on the power of this unit.
STRAIGHT
MASTER
ON 
OFF 
EFFECT
3Rotate the PROGRAM selector on the front panel to select the parameter you want to adjust.
The name of the selected parameter appears in the front panel display.
See pages 88 and 89 for a complete list of available parameters.
4Press STRAIGHT (EFFECT) on the front panel repeatedly to change the setting.
STRAIGHT
EFFECT
5Press MASTER ON/OFF on the front panel to release it outward to the OFF position to save the new setting and set this unit, Zone 2 and Zone 3 to the standby mode.
MASTER
ON 
OFF 
y
The new setting is activated next time you press
MASTER ON/OFF inward to the ON position to turn on the power of this unit, Zone 2 and Zone 3.
Notes
•The control buttons on the remote control and VOLUME as well as the other control buttons on the front panel except MASTER ON/OFF, STRAIGHT (EFFECT) and the PROGRAM selector are ineffective while you are using the ADVANCED SETUP menu.
•Zone 2, Zone 3 and the speaker relay are all turned off and all audio and video output is muted while you are using the ADVANCED SETUP menu.
•The ADVANCED SETUP menu is only available in the front panel display.
PROGRAM
ADVANCED SETUP
SP
Name of the selected parameter Current setting
■Speaker impedance SP IMP.
Use to set the impedance of this unit so that it matches that of your speakers.
Choices: 6ΩMIN, 8ΩMIN
•Select 6ΩMIN for speakers with 6 ohms or higher.
•Select 8ΩMIN for speakers with 8 ohms or higher.
■User preset PRESET
Use to reset all the parameters of this unit to the initial factory settings with the exception of System Memory and AUTO SETUP settings.
Choices: CANCEL, RESET
•Select CANCEL if you do not want to reset the parameters of this unit.
•Select RESET to reset the parameters of this unit.
Notes
•This setting does not affect the ADVANCED SETUP menu item parameters.
•The initial factory settings are activated next time you turn on the power of this unit.
88
