PLAYBACK
■Using the sleep timer
Use this feature to automatically set this unit in the standby mode after a certain amount of time. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. The sleep timer also automatically turns off any external components connected to the AC OUTLETS.
1Select an input source and start playback on the source component.
2Press SLEEP on the remote control repeatedly to set the amount of time.
SLEEP
Each time you press SLEEP, the front panel display changes as shown below.
SLEEP 120min | SLEEP 90min |
SLEEP OFF SLEEP 30min | SLEEP 60min |
The SLEEP indicator flashes while switching the amount of time for the sleep timer.
| DVD MD/TAPE | |||
| SLEEP | 120min VOLUME |
| |
|
|
| dB |
|
SP | SLEEP00120min |
|
| |
A | L R | SLEEP | ||
|
|
|
| |
|
|
|
|
|
The SLEEP indicator lights up in the front panel display, and the display returns to the selected sound field program.
VCR 1 CBL/SAT DTV DVD MD/TAPE | TUNER XM | |||
HiFi DSP | MUSIC | VOLUME | dB |
|
SP |
|
|
| |
Hall in Vienna |
|
|
| |
A | L | R | SLEEP | |
|
|
|
| |
|
|
|
|
|
3Press SLEEP repeatedly so that SLEEP OFF appears in the front panel display.
SLEEP
CD PHONO | TUNER XM | ||
SLEEP OFF | VOLUME | dB |
|
SP |
|
| |
|
|
| |
A | L | R | SLEEP |
|
|
| |
|
|
|
|
After a few seconds, SLEEP OFF disappears, and the SLEEP indicator turns off.
y
The sleep timer setting can also be canceled by pressing STANDBY on the remote control (or MAIN ZONE ON/OFF on the front panel) to set this unit, Zone 2 and Zone 3 to the standby mode.
■Downmixing to 2 channels
You can enjoy
Rotate the PROGRAM selector (or set AMP/SOURCE/TV to AMP and then press STEREO on the remote control) to select 2ch Stereo.
2ch Stereo appears in the front panel display.
PROGRAM
Front panel
or
AMP
STEREO
SOURCE | 1 |
| |
TV |
|
| Remote control |
2ch Stereo
Note
You can use a subwoofer with this program when SWFR or BOTH is selected in LFE/BASS OUT (see page 76).
■Listening to unprocessed input signals
When the unit is in the STRAIGHT mode,
1Press STRAIGHT (EFFECT) on the front panel or on the remote control to select
STRAIGHT.
STRAIGHT appears in the front panel display.
STRAIGHT | STRAIGHT |
| |
or | EFFECT |
EFFECT |
|
Front panel | Remote control |
40