Yamaha HTR-5990 owner manual Sb L/R Sp, Presence SP, Cross Over, Subwoofer Phase, Priority

Surround back speakers SB L/R SP

Choices: LRGx2, LRGx1, SMLx2, SMLx1, NONE

SB L/R SP

SMLx1 [SMLx2

•Select LRGx2 if you have 2 large surround back speakers. The unit directs the entire range of the surround back channel signal to the surround back speakers.

•Select LRGx1 if you have a large surround back speaker. The unit directs the entire range of the surround back channel signal to the left surround back speaker.

•Select SMLx2 if you have 2 small surround back speakers. The low-frequency signals of the surround back channels are directed to the speakers selected in

LFE/BASS OUT.

•Select SMLx1 if you have a small surround back speaker. The low-frequency signals of the surround back channel are directed to the speakers selected in LFE/BASS OUT, and the rest of the frequency signals are directed to the left surround back speaker.

•Select NONE if you do not have a surround back speaker. The unit directs all of the surround back channel signal to the surround left and right speakers.

Notes

•If you select LRGx1 or SMLx1, connect the speaker to the left SURROUND BACK speaker terminals.

•NONE is automatically selected if BI-AMP is set to ON (see page 89). This affects settings for SP LEVEL and SP DISTANCE.

Presence speakers PRESENCE SP

Use this feature if you want to use the presence speakers connected to this unit.

Choices: NONE, YES

PRESENCE SP

[NONE YES

•Select NONE if you do not have presence speakers.

•Select YES if you have presence speakers and want to use them.

MANUAL SETUP

Bass cross over CROSS OVER

Use this feature to select a cross-over (cut-off) frequency for all low-frequency signals. All frequencies below the selected frequency will be sent to the subwoofer.

Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 160Hz, 200Hz

THX recommendation: 80Hz

CROSS OVER

FREQ;;;80Hz(THX)

Subwoofer phase SUBWOOFER PHASE

If bass sounds are lacking or unclear, use this feature to adjust the frequency phase characteristics of your subwoofer.

Choices: NORMAL, REVERSE

•Select NORMAL not to reverse the phase of your subwoofer.

•Select REVERSE to reverse the phase of your subwoofer.

SUBWOOFER PHASE

[NORMAL REVERSE

Priority PRIORITY

Surround back and presence speakers do not output sound simultaneously. You can select to prioritize either speaker set when playing sources that contain surround back channel signals using CINEMA DSP sound field programs.

Choices: PRNS, SB

PRIORITY

PRNS [SB

•Select PRNS to use presence speakers even when surround back channel signals are input. The signals for the surround back channel will be output from surround speakers.

•Select SB to use surround back speakers when a surround back channel signal is detected in a CINEMA DSP program. Presence channel signals will be output from front speakers.

OPERATION ADVANCED

77