REMOTE CONTROL FEATURES
5Release the object used to press CLEAR to exit from the clearing mode.
CLEAR
Notes
•C;NG appears in the display window if clearing was unsuccessful. In this case start over from step 3.
•ERROR appears in the display window if you press a button not indicated in the respective step, or if you press more than one button simultaneously.
■Clearing a learned function
You can clear the function learned for a certain button in each control area.
1Set AMP/SOURCE/TV to SOURCE.
AMP
SOURCE
TV
4Press and hold CLEAR using a ballpoint pen or similar object and then press the button you want to clear for about 3 seconds.
C;OK appears in the display window if clearing was successful.
(U.S.A. model)
FREQ/RDS | EON | MODE PTY SEEK START |
REC
DISC SKIP
OFF ON MACRO LEARN CLEAR
y
•If you continuously want to clear another function, repeat step 4.
•If you continuously want to clear another function for another component, press SELECT k / n to select the component, then repeat step 4.
•Once you clear a learned function, the button reverts to the factory setting (or to the manufacturer setting if you have set remote control codes).
2Press an input selector button to select the source component containing the function you want to clear.
The selected component name appears in the display window.
(U.S.A. model)
A | XM | AUDIO SEL | SLEEP |
PHONO | TUNER | CD | MULTI CH IN |
CBL/SAT | MD/TAPE | ||
DTV | VCR 1 | DVR/VCR2 | DVD |
3Press LEARN using a ballpoint pen or similar object.
LEARN and the selected component name
(ex. DVD) appear alternately in the display window.
LEARN
Notes
•Do not press and hold LEARN. If you hold it down for more than 3 seconds, the remote control enters the remote control code setting mode.
•If you do not complete each of the following steps within 30 seconds, the learning mode will be automatically canceled. In this case, press LEARN again.
5Release the object used to press CLEAR to exit the clearing mode.
The remote control returns to the learning mode.
6Press LEARN again to exit.
Notes
•C;NG appears in the display window if clearing was unsuccessful. In this case, start over from step 4.
•ERROR appears in the display window if you press a button not indicated in the respective step, or if you press more than one button simultaneously.
