Ricoh CAMERA RDC-i500 Using the DR-3 Remote Control, Set the mode dial on the camera to a

Using the DR-3 Remote Control

■Shooting

A Set the mode dial on the camera to a

Recording mode (	, ,		or )
and press the		button to select

the recording destination.

B Decide the composition of the picture and press the RELEASE button on the remote control unit.

Press	to make the subject larger, and
press	to make the subject smaller.
● In	(Still Picture) mode

The self-timer LED will light and recording will start after about 2 seconds.

● In (Text) mode

RELEASE

ERASE FWD PROGRAM

EV

ENTER

REV

MULTI

Recording starts as soon as the RELEASE button is pressed.

● In (Voice Memo) or (Motion Picture) mode

Recording of the image and/or voice memo starts when the RELEASE button is pressed. Recording stops when the button is pressed again.

Setting the Exposure Compensation

A Press the EV (+/–) button on the remote control unit.

B Set the exposure compensation level using the FWD ( ) or REV ( ) button and press the ENTER button on the remote control unit.

Press the RELEASE button to record the image.

Shooting in Manual Focus Mode

A Press the PROGRAM button.

Each time you press the button, the mode changes as follows: AF → MF

→SNAP ( S ) → ￿.

B Adjust the focus using the FWD ( ) or REV ( ) button.

Press the RELEASE button to record the image.

The indicator “MAGNIFY:FUNCTION” on the LCD monitor is not effective.

●To cancel the mode setting

Press the PROGRAM button to change to the other mode.

5

Camera Settings and Other Functions

123