Ricoh CAMERA RDC-i500 operation manual Miscellaneous

Problem	Cause	Remedy	Page
Display shut off	Battery is exhausted	Charge battery.	P.15
	Auto power off activated	Switch power on again.	P.24
Remote control	Obstruction between remote control	Remove obstruction.	–
unit (optional)	unit and camera sensor	* Remote control reception at front side of
will not work		camera.
	Remote control transmitter or	Clean.	–
	camera sensor is dirty
	Remote control lithium battery is	Replace with new lithium battery.	–
	exhausted
LCD monitor	Area captured by autofocus field	No malfunction.	–
brightness	and surrounding area have different
changes during	light levels or location is dark
autofocus
operation
Vertical lines	Phenomenon occurring with bright	No malfunction.	–
appear on	subject, known as smear
image	phenomenon

■Miscellaneous

Problem	Cause		Remedy		Page
Card will not go	Card incorrectly oriented	Insert correctly.			P.20
into slot
Camera will not	Battery exhausted	Charge battery.			P.15
	Camera malfunction	Switch off power, switch on again and set
operate in
		mode dial to	(Still Picture) or	(Text).
response to
		If problem persists, reset.
buttons					–
		1. Remove battery from camera, switch
		power on and reload battery.
		2. Try operating again.
Date and time	Date/time setting is incorrect	Set correct date and time.			P.31
are wrong
Date and time	Battery removed	Date setting is reset if battery is removed			P.31
were set but		for approx. 20 days. Set date again.
disappeared
File will not	Erase menu not displayed	Set mode dial to	(Play) and press		P.103
erase, or card		button.
will not format	File protected	Cancel protect setting.			P.92
Mode settings	Keep settings mode not enabled	Enable keep settings mode.			P.108
have changed
Auto power off	Auto power off setting is disabled	Enable setting.			P.110
	Camera powered by AC adapter
will not activate.
	(auto power off is automatically
			–		–
	disabled when powered by AC
	adapter)
Beep will not	Beep disabled	Set beep sound to [ON].			P.111
sound
No image on	Incorrect video-out signal method.	Select correct video-out signal method.			P.114
	Incorrect video I/O switch setting on	Check video I/O switch setting on video			–
TV screen
	video equipment	equipment.

130