Ricoh CAMERA RDC-i500 operation manual To Cancel Recording, Flash LED

●Flash LED

When the flash fires, the flash LED (red) lights when the shutter release button is pressed lightly.

Note • During charging, the flash LED will blink and the display on the LCD monitor will disappear. Photographs cannot be taken at this time.

D Press the shutter release button down fully without removing your finger.

A beep will sound and the image will be displayed and recorded.

Note • Moving the camera before the beep sounds may result in a blurred image.

•You can take photographs with a voice memo. → P.54 “Shooting Still

Pictures and Text with Voice Memo”

To Cancel Recording

When the shutter release button is fully pressed, a photograph is taken and the image is displayed on the LCD monitor. At this time, press the button and when the confirmation message is displayed, press the shutter release button.

You can set the image display time to your liking. → P.109 “Changing the LCD Confirmation Time”

Important

Note

•During recording, do not open the battery cover, press the EJECT button to remove the card, or disconnect the AC adapter.

•During recording, the auto focus lamp and the flash lamp will flash. Do not turn the mode dial or turn the power off until the recording process

is complete.

You can not switch the storage memory by pressing the / button or display the MENU screen by pressing the MENU button while recording is in progress.

48