JVC GR-DVX90 Blank Search, EN43, Rotate the Menu wheel to select EXECUTE, then press it, Press

Rotate the MENU wheel to select “BLANK SRCH”, then press it. The Sub Menu appears.

Stop Button (5)

POWER Switch

Lock Button

MENU Wheel

EN43

Blank Search

Helps you find where you should start recording in the middle of a tape to avoid time code interruption (
pg. 21).

1 Load a tape (
pg. 10) and set the POWER Switch to

“” while pressing down the Lock Button located on the switch.

2 Press the MENU wheel. The Menu Screen appears.

3 Rotate the MENU wheel to select “ ”, then press it. “VIDEO MENU” appears.

4

5 Rotate the MENU wheel to select “EXECUTE”, then press it.

Display

V I DEO MENU

1RETURN

SOUND MODE ST EREO

1 2B I T MODE			SOUND L
SYNCHRO			SOUND R
REC MODE
BLANK SRCH		CANCE L
	COPY
			E X ECU T E
AV / S – V I DEO

44

Menu Screen

•“BLANK SEARCH” appears blinking and the camcorder automatically starts reverse or forward shuttle search, then stops at the spot which is about 3 seconds of tape before the beginning of the detected blank portion.

To cancel Blank Search midway . . .

.... press 5.

NOTES:

● In step 5, if the current position is at a blank portion the

camcorder searches in the reverse direction, and if the

current position is at a recorded portion the camcorder

searches in the forward direction.

● Blank Search does not work if “HEAD CLEANING

BLANK SEARCH

REQUIRED. USE CLEANING CASSETTE” has appeared

with the tape.

● If the beginning or end of the tape is reached during

Blank Search, the camcorder stops automatically.

● A blank portion which is shorter than 5 seconds of tape

cannot be detected.

● The detected blank portion may be located between

recorded scenes. Before you start recording, make sure

there is no recorded scene after the blank portion.