JVC GR-DVX90 specifications Date/Time Settings, Built-in Clock’s Rechargeable Lithium Battery

POWER Switch

POWER Lamp

Lock Button

Operation

Switch

MENU Wheel

			Display
		FADER / W I PE
		W I PE–SCROL L
		W I PE–SHUT T ER
			RANDOM
4			OF F
			FADER–WH I T E
			FADER–BLACK
			FADER–B . W
	D I SPLAY MENU						DISPLAY MENU
1RETURN
ON SCREEN
DAT E / T I ME
T I ME			CODE
CLOCK				1	. 1 . 0 0
	ADJ .					1 2 : 0 0

EN9

Date/Time Settings

The date/time is recorded onto the tape at all times, but its display can be turned on or off during playback (
pg. 41).

1 Set the Operation Switch to “ ” and set the POWER

Switch to “ ” while pressing down the Lock Button located on the switch, then open the LCD monitor fully or pull out the viewfinder fully. The POWER lamp lights and the camcorder is turned on.

2 Press the MENU wheel. The Menu Screen appears.

3 Rotate the MENU wheel to select “ ”. Press it and “DISPLAY MENU” appears.

4 Rotate the MENU wheel to select “CLOCK ADJ.”. Press it and “day” is highlighted.

Rotate the MENU wheel to input the day. Press it. Repeat to input the month, year, hour and minute. Rotate the MENU wheel to select “1RETURN”, and press it twice. The Menu Screen closes.

Built-in Clock’s Rechargeable Lithium Battery

To store the date/time in memory, the clock’s rechargeable lithium battery is integrated in the camcorder. While the camcorder is connected to an AC outlet using the AC Power Adapter/Charger, or while the battery pack attached to the camcorder continues to supply power, the clock’s rechargeable lithium battery is always charged. However, if the camcorder is not used for approx. 3 months, the clock’s lithium battery will become discharged and the date/time stored in memory will be lost. When this occurs, first connect the camcorder to an AC outlet using the AC Power Adapter/Charger for over 24 hours to charge the clock’s rechargeable lithium battery. Then perform the date/time setting before using the camcorder.

Note that the camcorder can be used without setting the date/time.

NOTE:

Even if you select “CLOCK ADJ.”, if the parameter is not highlighted the camcorder’s internal clock continues to operate. Once you move the highlight bar to the first date/ time parameter (day), the clock stops. When you finish setting the minute and press the MENU wheel, the date and time begin operation from the date and time you just set.