JVC GR-DVX90 specifications 18 EN, Snapshot Mode Selection, Snapshot Recording, Motor Drive Mode

18 EN

MENU Wheel MODE Dial

RECORDING Basic Recording For Video (cont.)

	Snapshot (For Video Recording)
	This feature lets you record still images that look like
POWER Switch	photographs onto a tape.

Lock Button

Operation Switch

SNAPSHOT Button

Display

	CAMERA MENU		Menu Screen
1RE TURN
REC MODE
SOUND MODE
ZOOM
SNAP MODE		FUL L
GA I N UP		P I N – UP
BEEP / TAL LY
I D NUMBER
DEMO. MODE

FULL Snapshot mode with no frame*

SNAPSHOT MODE SELECTION

Set the POWER Switch to “	” while pressing
1 down the Lock Button located on the switch and the
MODE Dial to “VIDEO” or “	”, then set the

Operation Switch to “ ”. Pull out the viewfinder fully or open the LCD monitor fully.

2 Press the MENU wheel. The Menu Screen appears.

3 Rotate the MENU wheel to select “ ”. Press it and “CAMERA MENU” appears.

4 Rotate the MENU wheel to select “SNAP MODE”, then press it.

5 Rotate the MENU wheel to select the desired Snapshot mode, then press it.

Rotate the MENU wheel to select “1RETURN” and press it twice. The Menu Screen closes.

SNAPSHOT RECORDING

1 Press SNAPSHOT.

If you press during Record-Standby . . .

.... “PHOTO” appears and a still image will be

recorded for approx. 6 seconds, then the camcorder re-enters the Record-Standby mode.

If you press during Recording . . .

.... “PHOTO” appears and a still image will be

recorded for approx. 6 seconds, then the normal recording resumes.

•To use the flash,
pg. 30.

PIN-UP

Pin-Up mode

*There is the sound effect of a shutter closing.

When the MODE Dial is set to “ ”, snapshot recording will be performed with higher quality (
pg. 22).

Motor Drive Mode

Keeping SNAPSHOT pressed provides an effect similar to serial photography. (Interval between still images: approx. 1 second)

NOTES:

●To remove the shutter sound,
“BEEP/TALLY” on pg. 27.

●If Snapshot recording is not possible, “PHOTO” blinks when SNAPSHOT is pressed.

●If Programme AE with special effects (
pg. 36) is engaged, certain modes of Programme AE with special effects are disabled during Snapshot recording. In such a case, the icon blinks.

●If SNAPSHOT is pressed when “DIS” is set to “ON” (
pg. 28), the Stabiliser will be disabled.

●To dub images recorded on a tape to a MultiMediaCard,
pg. 65.

●To reduce the Red-Eye effect in the subject’s eyes when the flash fires,
pg. 30.

●During playback as well, all snapshot modes are available

when “ COPY” is set to “OFF” in the Menu Screen (
pg. 41).

●When a headphone set is connected to the headphone connector, the shutter sound is not heard from the speaker, however it is recorded onto the tape.