JVC GR-DVX90 Grip Adjustment, Viewfinder Adjustment, Tripod Mounting, Dioptre Adjustment Control

8 EN

Power Zoom Lever

START/STOP Button

Lock Button

POWER Switch

MODE Dial

PAUSE

Dioptre Adjustment Control

GETTING STARTED (cont.)

Grip Adjustment

1 Separate the Velcro strip.

2 Pass your right hand through the loop and grasp the grip.

3 Adjust so that your thumb and fingers can easily operate the START/STOP Button and Power Zoom Lever. Refasten the Velcro strip.

Viewfinder Adjustment

1 Set the POWER Switch to “ ” while pressing down the Lock Button located on the switch and set the MODE Dial to any position.

2 Pull out the viewfinder fully.

3 Turn the Dioptre Adjustment Control until the indications in the viewfinder are clearly focused.

Tripod Mounting

1 Align the screw on the tripod with the camera’s mounting socket. Then tighten the screw.

CAUTION:

When using a tripod, be sure to open and extend its legs fully to stabilise the camcorder. To prevent damage to the unit caused by falling over, do not use a small- sized tripod.