JVC GR-DVX90 16 EN, Press START/STOP, To Stop Recording, To Adjust The Brightness Of The Display

16 EN RECORDING Basic Recording For Video

POWER Switch

POWER Lamp

Lock Button

MODE Dial

START/STOP Button

Display

2 5 Tape remaining time indicator (Approximate)

min 90 min 89 min 3 min

(Now calculating)

0min 1 min 2 min

(Blinking) (Blinking) (Blinking)

Tally lamp (lights while recording is in progress)

NOTE:

You should already have performed the procedures listed below. If not, do so before continuing.

●Power (
pg. 6)

●Grip Adjustment (
pg. 8)

●Viewfinder Adjustment (
pg. 8)

●Load A Cassette (
pg. 10)

●Recording Mode Setting (
pg. 11)

1 Set the MODE Dial to “VIDEO” and set the POWER

Switch to “ ” while pressing down the Lock Button located on the switch.

Shooting while using the viewfinder: Make sure the LCD monitor is closed and locked. Pull out the viewfinder fully.

•Be sure to pull out the viewfinder until you hear a click, otherwise it may be pushed back in during use.

Shooting while using the LCD monitor: Make sure the viewfinder is pushed back in. Open the LCD monitor fully.

•The POWER lamp lights and the camcorder enters the Record-Standby mode. “PAUSE” is displayed.

Press START/STOP. “	” appears while recording is
2 in progress.

To Stop Recording . . .

.... press START/STOP. The camcorder re-enters the

Record-Standby mode.

BR I GHT

180° 90°

To Adjust The Brightness Of The Display

.... rotate the MENU wheel until the bright level indicator

	on the display moves and the appropriate brightness is
MENU Wheel	reached.
	• It is also possible to adjust the brightness of the viewfinder.