JVC GR-DVX90 Flash Brightness Adjustment, EN31, Power Switch Lock Button Operation Switch

Rotate the MENU wheel to select “FLASH ADJ.”, and press it. The parameter appears.

POWER Switch

Lock Button

Operation Switch

EN31

Flash Brightness Adjustment

When a snapshot (
pg. 18, 19) is taken in the dark the camcorder fires the flash (
pg. 30) and adjusts the brightness automatically. You can also adjust the flash brightness manually. When you find that the snapshots you took look too bright or too dark, adjust it manually.

1 Set the Operation Switch to “ ” and set the POWER

Switch to “ ” while pressing down the Lock Button located on the switch, then pull out the viewfinder or open the LCD monitor fully.

2 Press the MENU wheel. The Menu Screen appears.

MENU Wheel

Display

MANUAL MENU

1RE TURN

D I S

SE L F – T I MER

5S

TE L E MACRO

W I DE MODE

W I ND CUT

F LASH

F LASH AD J . 2

Menu Screen

3 Rotate the MENU wheel to select “ ”, and press it. “MANUAL MENU” appears.

4

5 To intensify the flash, rotate the MENU wheel towards “+”. To weaken the flash, rotate it towards “–”. Adjustment range: –3 to +3.

6 Press the MENU wheel. Rotate it to select “1RETURN” and press it twice to close the Menu Screen.

NOTE:

When you change the subject you are shooting or the shooting location, set it back to ±0 as described in step 5 and take a snapshot to check the flash brightness. After doing this adjust to your desired brightness.