JVC GR-DVX90 60 EN, Dubbing To a VCR, To use this camcorder as a player, Reduces interference

Set “AV/S-VIDEO” to “OUT” in the Menu Screen (
pg. 41).

60 EN

POWER Switch

Lock Button

To S

DUBBING

Dubbing To A VCR

[To use this camcorder as a player]

1 Following the illustration, connect the camcorder and the VCR. Also refer to pg. 56 and 57.

2 Set the camcorder’s POWER Switch to “” while pressing down the Lock Button located on the switch, turn on the VCR’s power, and insert the appropriate cassettes in the camcorder and the VCR.

3

4 Engage the VCR’s AUX and Record-Pause modes.

Red to

AUDIO R

White to

AUDIO L

Audio/Video cable [RCA plug to RCA plug] (provided)

Yellow to

VIDEO*

Core filter

S-Video cable (provided)

To AUDIO, VIDEO* and

S-VIDEO IN connectors

5 Engage the camcorder’s Play mode to find a spot just before the edit-in point. Once it is reached, press 4/6on the camcorder.

6 Press 4/6on the camcorder and engage the VCR’s Record mode.

7 Engage the VCR’s Record-Pause mode and press 4/6on the camcorder.

8 Repeat steps 5 through 7 for additional editing, then stop the VCR and camcorder when finished.

NOTES:

● When connecting the cables, make sure to connect the

ends with a core filter to the camcorder. The core filter

reduces interference.

● You can use the AV OUT connector on the camcorder

for connection.

● You can use Playback Zoom (
pg. 68) or Playback

Special Effects (
pg. 69) in step 5.

● Before you start dubbing, make sure that the indications

VCR

TV

*Connect when the S-Video cable is not used.

do not appear on the connected TV. If they do, they are

being recorded onto the new tape.

To choose whether or not the following displays appear on the connected TV . . .

•Date/Time

.... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the

Menu Screen (
pg. 41).

•Time Code

.... set “TIME CODE” to “ON” or “OFF” in the Menu

Screen (
pg. 41).

•Playback Sound Mode, Tape Speed And Tape Running Displays

.... set “ON SCREEN” to “LCD” or “SIMPLE” in the Menu Screen (
pg. 41). Or, press DISPLAY on the remote control.