JVC GR-DVX90 specifications To End Progressive Mode Recording

22 EN RECORDING Advanced Features For Video And D.S.C.

START/STOP Button

MODE Dial

POWER Switch

Lock Button

SNAPSHOT Button

Progressive Mode Recording

This mode lets you record moving images (successive jitter-free still images) onto a tape. Images can then played back jitter-free, with superior quality. High-resolution still images can also be processed on a personal computer or can be printed out (
pg. 59).

1 Set the MODE Dial to “ ”, then set the POWER

Switch to “ ” while pressing down the Lock Button located on the switch. Pull out the viewfinder fully or open the LCD monitor fully.

2 To start Progressive Mode Recording, press START/ STOP.

To End Progressive Mode Recording . . .

.... press START/STOP. The camcorder enters the Record-

Standby mode.

NOTES:

●When an image recorded using the Progressive Mode is played back, the image may not look natural.

●When the MODE Dial is set to “ ”, Picture Wipe/ Dissolve (
pg. 34) and some Programme AE with special effects (
pg. 36) cannot be used.

●If SNAPSHOT is pressed in the PS mode, a snapshot will

be recorded with higher quality than in VIDEO mode. (
pg. 18).