JVC GR-DVX90 Digital Sound Effects, EN37, Sound Effect Mode Selection, Sound Effect Recording

INDEX Button

DIGITAL SOUND Button

Display

E X I T S O U N D

100-DVC00001

0 0 2 0 0 3

Selected (framed in green)

0 0 4 0 0 5 0 0 6

You can download sound data available at our Web Site (see below for URL) and transfer them from your PC to the MultiMediaCard to create more sound effects.

http://www.jvc-victor.co.jp/english/ download/d-sound/index.html

•Use the PC card adapter CU-V50U or floppy adapter CU-VFM40U to transfer sound data from a PC to the MultiMediaCard.

•Sound data should be copied into the MultiMediaCard’s DCSD¥100JVCGR folder.

•The file names should be in numerical sequence starting from DVC00001.mp3. If you are using the provided MultiMediaCard, file names should be from DVC00013.mp3 since 12 sound effects are pre-stored as DVC00001.mp3 through DVC00012.mp3.

EN37

Digital Sound Effects

12 sound effects (EXPLOSION, SIREN, LAUGHTER, RACE CAR, DOOR BELL, BUZZER, FANFARE, APPLAUSE, CHEERS, BOING, SCREAM and JEERS) pre-stored in the provided MultiMediaCard can be dubbed onto a tape.

SOUND EFFECT MODE SELECTION

	Load the provided MultiMediaCard ( pg. 12) and a
1 cassette ( pg. 10).
	Set the POWER Switch to “	” while pressing
2 down the Lock Button located on the switch and set
	the MODE Dial to “ ”, “VIDEO” or “		DUAL	”. Open

the LCD monitor fully or pull out the viewfinder fully.

3 Press INDEX. The SOUND Index Screen appears.

4 Rotate the MENU wheel to select the desired sound effect.

•Pressing DIGITAL SOUND starts playback of the currently selected sound effect so you can check it without recording it onto the tape. Press DIGITAL SOUND again to stop the sound effect playback.

5 Press the MENU wheel. The selection is complete.

SOUND EFFECT RECORDING

6 Press DIGITAL SOUND during recording. The selected sound effect indication with a “” mark appears blinking and the sound effect is recorded onto the tape.

•The sound effect cannot be heard from the speaker during recording. Use a headphone set to hear the sound effect.

To cancel recording the sound effect midway . . .

.... press DIGITAL SOUND again. The camcorder stops

recording the sound effect and the sound effect indication disappears.

NOTES:

●Sound effects can also be used for Audio Dubbing (
pg. 77).

●Sound effects created on a PC can be transferred to a MultiMediaCard by copying them into the MultiMediaCard’s sound folder with the specified file name. For details, refer to the instruction manual of the provided software.