Ricoh CAMERA RDC-i500 operation manual Changing the Exposure Metering System Photometry, Mult

C Choose the ISO sensitivity [AUTO,

ISO 200, ISO 400 or ISO 800] and then press the ENTER button.

D Press the CANCEL button to exit the menu display.

The selected ISO sensitivity will be displayed on the LCD monitor.

E Press the shutter release button to record the image.

Note • Enable the keep settings mode to save the ISO sensitivity setting. → P.108 “Keep Settings”

Changing the Exposure Metering System

(Photometry)

You can change the exposure metering system to record images.

Mode	Description
MULT	Multi-metering is performed by splitting the LCD monitor in
(multi-pattern)	several parts. This mode is also suitable for shooting the
	backlighted subject.
CTR WGHT	The middle of the LCD monitor is the focal point, and the
(center weighted)	light is measured uniformly over the whole screen.
SPOT	Exposure metering is performed of a part of the frame in the
(spot)	middle of the LCD monitor. This mode is used when the
	subject is exposed to strong light, such as backlight.

A Set the mode dial to [ ] and press the MENU button.

B Select [PHOTOMETRY] and press the button.

76