Ricoh CAMERA RDC-i500 operation manual Changing the ISO Sensitivity ISO Setting

D Press the CANCEL button to exit the menu display.

AB will be displayed on the LCD monitor.

E Press the shutter release button to record the image.

When the shutter release button is pressed, three frames will be taken in succession at –0.5 EV, 0 and +0.5 EV, based on the preset exposure compensation value.

Note • Auto Bracket cannot be used when the image quality mode is set on non-compressed mode (NC) or when [VOICE MEMO] is set on [ON].

• The flash does not fire in auto bracket mode.

Changing the ISO Sensitivity (ISO Setting)

You can change the ISO sensitivity.

A Set the mode dial to [ ] or [ ] and press the MENU button.

B Select [ISO SETTING] and then press the button.

3

Shooting

75