Ricoh CAMERA RDC-i500 operation manual Shooting in Auto Bracket Mode Auto Bracket

E Press the shutter release button.

The first photograph will be taken and then additional photographs will be taken at the preset time interval.

The “INTERVAL” message will blink during interval (time-lapse) recording. Picture taking will end when the storage memory runs out of memory.

Note • Press the CANCEL button during recording to stop the interval (time- lapse) recording.

•Normal picture taking is possible during interval (time-lapse) recording by pressing the shutter release button. The preset time interval will not change.

•The time interval may become longer than the preset interval, depending on the image quality mode and flash mode settings.

•If using the battery, the battery may become exhausted during interval (time-lapse) recording. It is recommended to use the optional AC adapter.

Shooting in Auto Bracket Mode (Auto Bracket)

This function takes three frames in succession: one each at –0.5 EV, 0 and +0.5 EV, based on the exposure compensation value set in “Setting the Exposure Compensation” (P.58). This function is useful for checking the exposure compensation.

Mount the camera on a tripod or level surface to prevent camera shake.

A Set the mode dial to [ ] and press the MENU button.

B Select [AUTO BRACKET] and then press the button.

C Select [ON] and then press the

ENTER button.

Note • To cancel the auto bracket mode, select [OFF].

74