Ricoh CAMERA RDC-i500 operation manual Initializing the Settings

D Choose the power setting (YES or

NO) and then press the ENTER button.

If you select [YES], the camera will turn on when the LCD monitor is opened.

E Press the CANCEL button to return to the Setup menu.

Note • To turn the power off, press the power switch.

•The power setting will be reset to the factory default (NO) when you remove or replace the battery. You can restore the set value by turning the power on again.

Initializing the Settings

This function enables you to reset all the settings and return them to their factory default settings.

Important

Note

•Intializing all the settings will also erase the information and images in the internal memory.

A Set the mode dial to [ ].

B Select [CAMERA SETTINGS] and press the button.

C Select [INITIALIZE] and press the button.

118