Ricoh CAMERA RDC-i500 operation manual Changing the LCD Confirmation Time

Changing the LCD Confirmation Time

When you press the shutter release button to record the image in (Still Picture) mode, the recorded image will be displayed on the LCD monitor. You can select the time for confirming the image after shooting from 0 second (OFF), 1 second, 2 seconds, 3 seconds and 5 seconds.

A Set the mode dial to [ ].

B Select [CAMERA SETTINGS] and press the button.

C Select [LCD CONFIRM.] and press the button.

D Choose the confirmation time (OFF, 1

SEC., 2 SEC., 3 SEC. or 5 SEC.) and then press the ENTER button.

The confirmation time will be changed and the display will return to the Camera Settings menu.

E Press the CANCEL button to return to the Setup menu.

Note •	If the confirmation time is set on OFF, no image is displayed.
•	In	(Still Picture) mode with voice memo, when non-compressed
	(NC) mode has been set, and in		(Text) mode, the image will be
	displayed until recording is completed, regardless of the preset
	confirmation time.

5

Camera Settings and Other Functions

109