PRESENCE/ZONE 2(3) terminals
Connect presence speakers to these terminals.
Note
You can also use these terminals to connect the Zone 2 speakers (see page 103).
1Open the tab.
2Insert one bare wire into the hole of each terminal.
3Return the tab to secure the wire.
CONNECTIONS
■Speaker layout
Refer to the following illustration as to where to place each speaker in your listening room.
| 9 |
|
|
10 | 2 |
|
|
4 |
|
| |
| 1 | 7 | |
|
| ||
3 |
|
| |
|
|
| |
| 8 |
| 5 |
|
| 6 | |
|
|
|
1Subwoofer
2Front right speaker
3Front left speaker
4Center speaker
5Surround back right speaker
6Surround back left speaker
7Surround right speaker
8Surround left speaker
9Presence right speaker
10Presence left speaker
PREPARATION
■Connecting the banana plug
(With the exception of U.K., Europe and Asia models) First, tighten the knob and then insert the banana plug connector into the end of the corresponding terminal.
Banana plug
(With the exception of U.K., Europe and Asia models)
y
You can also use banana plugs with the PRESENCE/ZONE 2(3) speaker terminals. Open the tab, then insert one banana plug connector into the hole of each terminal. Do not attempt to close the tabs after connecting the banana plugs.
15
