Yamaha HTR-5990 Blfe Level, Daudio SET, Ehdmi SET, Cdynamic Range, Low-frequency effect level

MANUAL SETUP

Test tone TEST

Turns the test tone output on or off to compare the tonal quality of the center, surround L/R, surround back L/R, surround back and presence L/R speakers with that of the front L/R speakers.

Choices: ON, OFF

■Low-frequency effect level

B)LFE LEVEL

Use to adjust the output level of the LFE (low-frequency effect) channel according to the capacity of your subwoofer or headphones. The LFE channel carries low- frequency special effects which are only added to certain scenes. This setting is effective only when this unit decodes Dolby Digital or DTS signals.

Choices: –20 to 0 (dB)

B)LFE LEVEL

. SPEAKER;;;;;;0dB

HEADPHONE;;;;0dB

p p

Speaker LFE level SPEAKER

Select to adjust the speaker LFE level.

Headphone LFE level HEADPHONE

Select to adjust the headphone LFE level.

Note

Depending on the settings of LFE LEVEL, some signals may not be output from the SUBWOOFER PRE OUT jack.

■Dynamic range C)DYNAMIC RANGE

Use to select the amount of dynamic range to be applied to your speakers or headphones. This setting is effective only when the unit is decoding Dolby Digital and DTS signals. Choices: MIN (minimum), STD (standard),

MAX (maximum)

■Audio set D)AUDIO SET

Use to customize the overall audio settings for this unit.

D)AUDIO SET

. MUTE TYPE;;;FULL A.DELAY;;;;;;0ms

TONE BYPASS;AUTO

LE>E

p p

Muting type MUTE TYPE

Use to adjust how much the muting function reduces the sound output.

Choices: FULL, –20 dB

•Select FULL to completely halt all output of sound.

•Select –20 dB to reduce the current volume by 20 dB.

Audio Delay A.DELAY

Use to delay the sound output and synchronize it with the video image. This may be necessary when using certain LCD monitors or projectors.

Choices: 0 to 240 (ms)

Tone bypass TONE BYPASS

Use to automatically bypass the tone control when BASS and TREBLE are set to 0 dB.

Choices: AUTO, OFF

•Select AUTO to automatically bypass the tone control when BASS and TREBLE are set to 0 dB.

•Select OFF not to bypass the tone control at any time.

■HDMI set E)HDMI SET

Use to adjust the HDMI support audio.

E)HDMI SET

SUPPORT AUDIO:

HTR-5990

[<]/[>]:Adjust

C)DYNAMIC RANGE

. SP: MIN STD[MAX HP: MIN STD[MAX

p p

Speaker SP

Select to adjust the dynamic range of speakers.

Headphone HP

Select to adjust the dynamic range of headphones.

•Select MIN if you regularly listen at low volume levels.

•Select STD for general use.

•Select MAX to preserve the greatest amount of

dynamic range.

Support audio SUPPORT AUDIO

Use to select whether to play back HDMI audio signals on this unit or on another HDMI component connected to the HDMI OUT jack on the rear panel of this unit.

Choices: HTR-5990, OTHER

•Select HTR-5990 to play back HDMI audio signals on this unit. The HDMI audio signals input at the HDMI IN jacks of this unit are not output to the HDMI component connected to the HDMI OUT jack on the rear panel of this unit.

•Select OTHER to play back HDMI audio signals on another HDMI component.

Note

The HDMI video signals input at the HDMI IN 1 or HDMI IN 2 jack of this unit are always output at the HDMI OUT jack of this unit.

80