Yamaha HTR-5990 owner manual Resetting parameters to the factory values

EDITING SOUND FIELD PARAMETERS

3Select the sound field program you want to adjust.

STEREO MUSIC ENTERTAIN MOVIE

1 2 3 4

THX	STANDARD	SELECT EXTD. SUR
5	6	7	8
1	MEMORY 2	A	SPEAKERS B
9	0	+10	ENT.

Sound field category

MUSIC

Cursor . Pop/Rock

DSP LEVEL ; ; ; ; 0dB

P . INIT . DLY ; ; 21ms

P . ROOM SIZE ; ; 1 . 0

S . INIT . DLY ; ; 31ms

S . ROOM SIZE ; ; 1 . 0

Parameters Parameter values

4Press k / n to select the parameters.

PRESET/CH

ENTER

A-E/CAT.

Memory back-up

The memory back-up circuit prevents the stored data from being lost. However, the stored data will be lost in case the power cord is disconnected from the AC wall outlet for more than one week.

■Resetting parameters to the factory values

To reset a certain parameter

Select the parameter you want to reset, then press l / h repeatedly until the asterisk mark (*) next to the parameter name disappears from the video monitor.

To reset all parameters

Use PARAM. INI (see page 85).

5Press l / h to change the parameter value.

PRESET/CH

ENTER

A-E/CAT

When you set a parameter to a value other than the factory preset, an asterisk mark (*)

appears by the parameter name on the video monitor.

6Repeat steps 3 through 5 as necessary to change other program parameters.

Notes

•The available parameters may be displayed on more than one OSD page for some of the programs. To scroll through pages, press k / n.

•You cannot change parameter values when MEMORY GUARD is set to ON. If you want to change the parameter values, set MEMORY GUARD to OFF (see page 84).

60