Getting Started

Attach the Camera Strap

To reduce the risk of dropping the camera, it is strongly recommended to attach and use the provided camera strap.

To reduce the risk of dropping the camera, it is strongly recommended to attach and use the provided camera strap.

Charging the Battery

The battery that comes along with your package is not fully charged. You need to charge the battery before using the camera.

1.Insert the battery into the battery charger as shown.

2.Connect the power cord to the battery charger.

3.Plug the power cord to the main outlet.

The battery charging time is 2 hours.

Inserting the Battery

Follow these instructions to insert the battery into the battery/memory card compartment. Please read "Battery Information" on page 2 before inserting/removing battery.

1.If the battery is already installed, make sure to power off the camera before removing and inserting a recharged or new battery.

2.Open the battery/memory card compartment at the bottom of the camera as illustrated.

6

Page 10
Image 10
HP SW450 manual Getting Started, Attach the Camera Strap, Charging the Battery, Inserting the Battery