HP SW450 manual Using the Record Menu, Setting the Scene Mode, To go to Record Menu

Vivid	Images are tinted green. Ideally used to record images like mountains and lawns to
Green	make them more vivid.
Vivid Blue	Images are tinted blue. Ideally used to record images like the sky and the ocean to
	make them look more vivid.

Using the Record Menu

In Photo mode, access to the Record menu is done by simply by pressing the Menu button on back of the camera.

When the menu is displayed, use the 4-way navigation control and the OK button to move through menu selections and apply the desired settings. To close the menu anytime, press the menu button again.

Record Menu

The Record menu allows changes to the scene modes, and setup other capture settings.

To go to Record Menu:

Set the mode switch Photo Mode [ ].

1.Press Menu button to launch the Record Menu.

2.Use the or keys to move through the menu

3.To select an item, press .

4.Change the submenu settings using the 4-way navigation control.

5.Press the OK button to save and apply settings.

Setting the Scene Mode

This camera offers 32 different modes, that can assist in taking a photo with the optimal settings or desired effects.

1.From the Record Menu, enter the Scene Mode options menu.

2.Use the left and right navigation controls to move through the selections.

3.The highlighted scene mode will either have text that describes the benefits of the mode or have a side‑by‑side photo comparison that illustrates the benefits. The photo on the left is a typical auto mode result and the photo on the right illustrates the benefit of selecting that scene mode. It is important to note that by selecting a particular scene mode (other that Auto) will take the camera out of it’s normal automatic settings capabilities and therefore optimise various settings that match a specific scene.

4.Press the OK button to save and activate the selected scene mode.

30