Cino FM400 manual Telepen Setting

Mount	Manual
FuzzyScanFixed	Programming
	Scan

Symbology Reading Control

♦ Telepen Setting ♦

PROGRAM				F_DEFAULT
Family Code Selection	P.C	Parameter Selection		Option Code
Telepen Setting	SS	Disable Telepen ￿	0
	SS	Enable Telepen	1
	SS	Select Telepen Numeric mode ￿		2
	SS	Select Telepen Full ASCII mode		3
	SS	Disable check digit transmission ￿	4
	SS	Enable check digit transmission	5
Telepen Min. Length	SS	Default (04) ￿		FIN
	MS	01-Maximum		(2 digits)
		Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
		this selection automatically.
Telepen Max. Length	SS	Default (98) ￿		FIN
	MS	98-Minimum		(2 digits)
		Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate
		this selection automatically.

30