FuzzyScan Fixed Mount
Scan
Programming Manual
6
Under trigger mode, the scanner will turn on the light source
to read barcode when it receives an external trigger or a
serial trigger ON command. Once the external trigger has
been released, or the scanner g ets a good read or a serial
trigger OFF command, the scanner will stop reading and
wait for the next trigger to activate scanning again.
When the scanner receives an external trigger or a serial
trigger ON command under alternative mode, the scanner
will turn on the light source to read barcodes until the
preset scan input time-out is up. The scan input time-out
will be reset after each good read. Once the light source
goes off, the scanner is waiting for the next trigger to
activate scanning again.
When the scanner receives an external trigger or a serial
trigger ON command under level mode, the scanner will
turn on the light source to read barcodes until a good read
is performed or the preset scan input time-out is up. Once
the light source goes off, the scanner is waiting for the next
trigger to activate scanning again.
Under presentation mode, the scanner will automatically
detect the object movement in the scanner field of view.
Once the scanner detects a similar barcode image, the
scanner will turn on the light source to read barcodes until
the preset scan input time-out is up. For dark
environments, you may adjust the setting of “Presentation
Sensitivity” to increase the detection sensitivity.
Under force mode, the scanner continues to read barcodes
without using external trigger or serial trigger. Please note
that the scanner will not stop reading until you switch into
another operation mode.
Trigger mode
Alternative mode
Level mode
Presentation mode
Force mode