Single scan selection | Multiple scans selection |
Mount | Manual |
FuzzyScanFixed | Scan |
Programming |
Scan |
“PROGRAM” |
Scan |
One of Family Codes |
Scan |
One of Option Codes |
Yes |
Repeat |
Selection |
No |
Scan |
“END” |
Enter programming mode.
Select one of desired programming families.
Select one option code of desired parameter.
Want to select another programming family?
Exit programming mode.
Scan |
“PROGRAM” |
Scan |
One of Family Codes |
Scan One or |
Several Option Codes |
Yes |
Repeat |
Selection |
No |
Scan
“END”
Enter programming mode.
Select one of desired programming families.
1.Select one or several option codes to select desired parameters.
2.If it’s necessary, scan “FIN” to terminate option code selection.
Want to select another programming family?
Exit programming mode.
10
