Mount | Manual |
FuzzyScanFixed | Programming |
| Scan |
|
|
Serial Interface Control
♦ Protocol, ACK/NAK Setting ♦
PROGRAM |
|
|
|
|
| F_DEFAULT |
|
|
|
|
|
|
|
Family Code Selection |
| P.C |
| Parameter Selection |
| Option Code |
|
|
|
|
|
|
|
Handshaking Protocol |
| SS |
| None (free running mode) |
| 0 |
|
|
|
|
|
| |
|
| SS |
| RTS/CTS (hardware handshaking) |
| 1 |
|
| SS |
| ACK/NAK (software handshaking) |
| 2 |
|
| SS |
| Xon/Xoff (software handshaking) |
| 3 |
|
|
|
|
|
|
|
NAK Retry Count |
| SS |
| 3 times |
| FIN |
|
|
|
|
|
| |
|
| SS |
| 0~255 times |
| (3 digits) |
|
|
|
|
|
|
|
ACK/NAK Transmission Indication |
| SS |
| Disable |
| 0 |
|
|
| Enable |
|
| |
|
| SS |
|
| 1 | |
|
|
|
|
|
|
|
USB COM doesn’t support RTS/CTS handshaking protocol.
When the ACK/NAK Software Handshaking option is selected, the FuzzyScan waits for an ACK (acknowledge) or NAK (not acknowledge) from the host computer after each data transmission. If the NAK is received, FuzzyScan will
NAK Retry Count
After transmitting data, the scanner expects a NAK response from the host up to the preset “Serial Response
1)After preset NAK retry counts is received within the preset serial response
2)If the preset
The default retry counts are three times. If you program “0 time”, the scanner won’t resend the data to the host when the scanner receives a NAK. The scanner will discard the data. If you program “255 times”, the scanner can receive unlimited NAKs from the host within the
This function is not available for batch mode. When you enable this function in
ACK/NAK Transmission Indication:
Disable: There’s neither LED nor beeping indication for this setting.
Enable: There’s a specific LED and beeping indication for this setting.
39
