Cino FM400 manual Data Organizer Setting, Organizer Control

Mount	Manual
FuzzyScanFixed	Programming
	Scan

Condensed DataWizard

♦ Data Organizer Setting ♦

PROGRAM						F_DEFAULT
Family Code Selection	P.C		Parameter Selection		Option Code	2nd Option Code
Organizer Control	SS		Disable ￿		FIN
	MS		Select one bar code symbology		(2 digits)	automatic termination
	MS		Select all bar code symbologies	00		automatic termination
1st Organization	SS		Disable ￿		FIN
						0 (Forward) ￿
	DS		Enable		(2 digits)
						1 (Backward)
			2-digits identified position;		position
			Forward/backward data transmission setting		direction
2nd Organization	SS		Disable ￿		FIN
						0 (Forward) ￿
	DS		Enable		(2 digits)
						1 (Backward)
			2-digits identified position;		position
			Forward/backward data transmission setting		direction
Include/Exclude Control	SS		Transmitted data excluded the data of identified position ￿	0
	DS	Transmitted data included the data of identified position		1

￿The Data Organizer is used to edit the scanned raw data prior to transmitting the data to the host computers or terminals. It allows you to select desired bar code symbologies for organizer control, and provides maximum two identified positions to send the data forward or backward. It also allows you to control the transmitted data including or excluding the data of identification position. Please refer to the application example listed in page 37 for details.

￿While the Data Organizer is enabled, it arranges only scanned data without Preamble, Postamble, STX, ETX, Data Length, Prefix/Suffix Symbology ID or Record Suffix.

￿Regarding the “Bar Code Selection” and “Position Calculation” of Data Organizer, please refer to page 49 for details.

￿Please note that all “Character” input should be referred to the ASCII/HEX Table.

53