Mount | Manual |
FuzzyScanFixed | Programming |
| Scan |
|
|
Operation Control
♦ Operation Mode Setting ♦
PROGRAM |
|
|
|
|
| F_DEFAULT |
|
|
|
|
|
|
|
Family Code Selection |
| P.C |
| Parameter Selection |
| Option Code |
Operation Mode |
| SS |
| Trigger mode |
| 1 |
|
|
|
|
|
| |
|
| SS |
| Presentation mode |
| 2 |
|
| SS |
| Alternative mode |
| 3 |
|
| SS |
| Force mode |
| 5 |
|
| SS |
| Level mode |
| 8 |
|
|
|
|
|
|
|
Trigger Mode (External Triggering) When the scanner receives an external trigger or a serial trigger ON command under trigger mode, the scanner will turn on the light source to read barcode until gets a good read, a serial trigger OFF command or a release of external trigger. Once the light source goes off, the scanner is waiting for the next trigger to activate scanning again.
Presentation Mode (Auto Detection) Under presentation mode, the scanner will automatically detect the object movement in the scanner field of view. Once the scanner detected a similar barcode image, the scanner will turn on the light source to read barcodes until the preset scan input
Alternative Mode (Periodic Power Off) When the scanner receives an external trigger or a serial trigger ON command under alternative mode, the scanner will turn on the light source to read barcodes until the preset scan input
Force Mode (Continued Power On) Under force mode, the scanner continues to read barcodes without using external trigger or serial trigger. Please note that the scanner will not stop reading until you switch into another operation mode.
Level Mode (Auto Power Off) When the scanner receives an external trigger or a serial trigger ON command under level mode, the scanner will turn on the light source to read barcodes until a good read is performed or the preset scan input
41
