Use Your FuzzScan
Mount | Manual |
FuzzyScanFixed | Scan |
Programming |
Both FuzzyScan Barcode commands and Serial commands are available to configure your FM400. The FuzzyScan barcode commands are a series of proprietary barcodes which allow you to easily configure the scanner for most applications. Moreover, the FuzzyScan serial commands are ideal for precise and complicated reading control in
External Trigger and Serial Trigger
The FM400 provides both external trigger and serial trigger to activate the scanning processes. Please note that the external trigger is available for universal models only. The serial trigger is one of serial commands available for all models including RS232 serial and USB COM Port Emulation interfaces.
Scan Input Time-out
The scan input
OK/NG Signals
The universal models provide additional OK and NG outputs for more precise reading control. If the scanner got a good read, a signal will be outputted through scanner OK pin. However, if the scanner failed to read the barcode during a reading cycle or preset scan input
The OK and NG outputs are designed as NPN signal outputs and have been preset to active low. If necessary, you are able to change the active state of OK and NG outputs to meet your applications.
Operation Modes
The FuzzyScan FM400 series provides five different operation modes, including trigger, alternative, level, presentation and force modes to meet various application demands.
Both the presentation and force modes support triggerless operation, you don’t need to use either external trigger or serial trigger to activate the scanning. But the trigger, alternative and level modes have to work with external trigger or serial trigger to scan barcode.
5
