Setting up the ONE FOR ALL 1
(How to
Direct code set-up
To set up the ONE FOR ALL 1 for your television:
1.
Make sure your device (television) you wish to operate is switched on (not in standby).
2.
3.
4.
5.
| ONE | FOR |
| |
|
|
| 3,041 | |
| 0000897,0093,036 |
| ||
Acura | 00217,0216 |
| ||
Admiral | 0264 |
|
| |
Adyson | 0516 |
| 7, | |
Agazi | 0087 | 0009,003 | ||
AGB | 0216, |
| 0371 | |
Agef |
| 0037,0274 | ||
Aiko |
| 0361,0208, |
| |
_ _ _ _
Find the code for your device in the Code List (page 10 - 14). The device codes are listed per brand name. Also the most popular code for each brand is listed first. If your brand is not listed at all, try the Search Method on page 7.
Press and hold down MAGIC until the red light blinks twice (the red light will blink once then twice).
Enter your
Now aim the ONE FOR ALL 1 remote at your
device (television) and press POWER. If your device switched off, the ONE FOR ALL 1 is ready to operate your device.
-Most TV’s do not switch back on pressing the POWER key, please try pressing a “number” key or the
-If your device does not respond, follow steps 1 through 5 with each code listed for your brand. If none of the codes listed for your brand operate your device, then try the Search Method described on page 7, even if your brand is not listed at all.
-Some codes are quite similar. If your device does not respond or is not functioning properly with one of the codes, try another code listed under your brand.
-Write your device code in the applicable four digit boxes provided in the battery compartment and on page 8 for future reference.
6 | WWW.ONEFORALL.COM |