Colour and Brightness, Trouble Shooting

Colour and Brightness

Depending on the functions of your original remote control, the ONE FOR ALL 1 may operate the colour and brightness settings of your television.

Colour (+) = Press and release MAGIC then hold Volume (+) Colour (-) = Press and release MAGIC then hold Volume (-)

Brightness (+) = Press and release MAGIC then hold Channel (+) Brightness (-) = Press and release MAGIC then hold Channel (-)

Problem:	Solution:

Your brand is not listed	Try the search method on page 7.
in the code section?

The ONE FOR ALL 1 does	A) Try all the codes listed for
not operate your	your brand.
device(s)?	B) Try the search method on
	page 7.

The ONE FOR ALL 1 is not	You may be using the wrong
performing commands	code. Try repeating the Direct
properly?	Set-Up using another code listed
	under your brand or start the
	search method over again to
	locate the proper code.

Problems changing	Enter the program number
channels?	exactly as you would on your
	original remote.

The ONE FOR ALL 1 does	Make sure you are using new
not respond after	batteries and are aiming the ONE
pressing a key?	FOR ALL 1 at your device.

The red light (LED) does	Replace batteries with 2 fresh,
not blink when you press	new “AA/LR6” alkaline batteries.
a key?