Trouble-Shooting, Helpful Hints, Twice

Trouble-Shooting

Problem:	Solution:

Your brand is not listed in the	Try the search method.
ONE FOR ALL code section?

The ONE FOR ALL does not	A) Try all the codes listed for your
operate your device?	brand. B) Try the search method.

The ONE FOR ALL is not	You may be using the wrong code.
performing commands	Try Direct Set-Up again trying each
properly?	code listed under your brand or start
	the search method over again to
	locate the proper code.

Your TV switches to	Press TV, then press MAGIC until the
programme 1 when you press	red light blinks twice.
the POWER key before	Then press:
switching off OR you must	(Programme-)
press POWER twice to switch	(Programme+)
on your TV?	(Programme-)

You cannot reach channel 10	If your original remote did not have
and above on your TV or	channel +/- keys, the Zapper may not
Satellite.	operate this function.

Video not recording?	As a safety feature on your ONE FOR
	ALL, you must press the Record key
	twice.

The ONE FOR ALL does not	Make sure you are using new
respond after pressing a key?	batteries and are aiming the ONE
	FOR ALL at your device.

The red light does not blink	Replace batteries with 2 new
when you press a key?	“AAA/LR03” alkaline batteries