
Code Blink Out
After you have used the Search Method, you can find out which code the ZAPPER responded to by blinking back the code. It’s useful to know your Television, Video, Satellite Receiver or Cable Converter code for future refe- rence. Remember, you can only blink back your code after the ZAP-
PER is operating your device.
To blink out your TV code:
1TV
2
3
4
5
6
7
Press the TV key on the ZAPPER.
Press and hold the MAGIC key until the red light blinks twice (it will blink once then twice).
Next, press
Programme(+).
For the first digit of your ) and count all the red blinks.
For the second digit, press Volume - ( ) and count all the red blinks.
For the third digit, press Programme(+) and count all the red blinks.
For the fourth digit, press
8 | For the fifth digit, press MUTE and count all the red blinks. |
Now you have your
Important note: To blink out the code for your Video Recorder, Satellite Receiver or Cable Converter, follow the same instructions above, only press the VCR or SAT key during step 1.
WWW.ONEFORALL.COM | 9 |