OFA 6 PVR 2/15/03 9:25 AM Page 32
TROUBLESHOOTING (continued)
PROBLEM: DVD/VCR Combo does not respond properly.
SOLUTION: Use the VCR codes for your brand. Some combo units may require both a DVD code and a VCR code for full operation.
PROBLEM: Changing channels does not work properly.
SOLUTION: If the original remote control required pressing ENTER to change channels, then press ENTER on the remote control after entering the channel number.
PROBLEM: Tried Search For Your Code method and still could not find a working code.
SOLUTION: Clear the device key as follows: Press and hold SET until the LED (red light) blinks twice, then release. Next enter 9 - 9 - 2. Then press the device key to be cleared twice. Now repeat the Search For Your Code method on page 11.
PROBLEM: Remote control does not turn on Sony or Sharp TV/VCR Combo.
SOLUTION: For power on, these products require programming TV codes. For Sony, use TV code 0000 and VCR code 0032. For Sharp, use TV code 0093 and VCR code 0048.
PROBLEM: CH+ and CH- do not work for your
RCA TV.
SOLUTION: Due to RCA design
PROBLEM: No remote control of volume.
SOLUTION: See Changing Volume Lock on page 16 to lock/unlock volume.
32