Programme Scan
Scan
Your ONE FOR ALL 4 comes with a special Scan function which lets you “scan” through every programme available on your TV, VCR, Satellite or Cable Box.
For example, to scan the programmes on your TV:
1
2
Aim the ONE FOR ALL 4 at your TV. Press the TV key. Press and release MAGIC then press the MUTE key.
The ONE FOR ALL 4 will send the command to advance through all the programmes available on your Television stopping at each programme for about three seconds. Remember, you must aim the ONE FOR ALL at your device the entire time you are using Scan.
When you find a programme you would like to watch, simply press the device key you are using (TV, VCR, SAT). In this case press the TV key.
Important notes:
-To use Scan with your VCR, Satellite or Cable Box, follow the same instructions above, only press the VCR or SAT key during step 1 and 2.
-Scan may not function with devices that did not have a programme +/- key on the original remote control.
27