One for All URC8820N warranty Using Learning, Checking the Codes, Learning Precautions

Page 7

5.Press CH+ to begin searching for your code. Stop the search when the device turns off or performs the function selected in step 4 (if other than POWER).

NOTE: In the search mode, the remote control will send IR codes from its library to the selected device, starting with the most popular code first. Every press of CH+ will send a new code. If you go past the code that performed the Test Function, you can go back by pressing CH‑.

6.To lock in the code, press and release the SET key. The LED blinks twice.

7.To search for the codes of your other devices, repeat steps 1 through 6, but substitute the appropriate device key for the device you are searching for in step 1.

Checking the Codes

If you have set up the remote control using the Searching For Your Code procedure, you may need to find out which four-digit code is operating your equipment. For example, to find out which code is operating your TV:

1.On the remote control, press TV once.

2.Press and hold SET until the LED (red light) blinks twice, then release SET.

3.Enter 9 9 0. The LED will blink twice.

4.To view the code for the first digit, press 1 once. Wait 3 seconds, count the LED blinks (e.g., three blinks = 3) and write down the number in the leftmost box in the TV code boxes. NOTE: If a code digit is 0, the LED will not blink.

5.Repeat step 4 three more times for remaining digits. Use 2 for the second digit, 3 for the third digit, and 4 for the fourth digit. Write down the code digits in the remaining TV code boxes.

6.To check for codes of other devices, repeat steps 1 through 5, but substitute the appropriate device key for each device you are checking. Write down the device’s code digits in the appropriate code boxes.

Using Learning

This remote includes a Learning feature so you can add functions that are unique to your home entertainment devices (e.g., DVD EJECT). However, there are some considerations.

Learning Precautions

•Your original remote controls must be in working order for learning to work properly.

•Learned keys are mode specific, so each one can store a unique function for each mode.

•Learned keys can be used in macros (see “Using Macros”).

•Do not use the following keys for learning: Device Keys, SET, FAV, or Record (•) Key.

•Learning capacity is approximately 50 to 70 keys, depending on the code being learned.

•If both learned and keymoved functions are assigned to the same key, the last programmed function is stored.

•A learned function cannot be used as a source for Keymover

(see “Using Keymover”).

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Contenido ContentsFeatures and Functions Installing BatteriesIntroduction Key Charts Device Controls These Devices KEY Device TableSetting Up Your Components To control a TV/DVD Combo Programming Combo Device ControlSearching For Your Code CBL/SAT CodeLearning Precautions Using LearningChecking the Codes Deleting Functions From The Learning Keys Changing Volume LockLocking Volume Control To One Mode Global Volume Lock Programming a Learning KeyProgramming a Favorite Channel Unlocking All Volume Control Restoring Default SettingProgramming a Macro On a Device Key Programming a Master Power MacroTo Program the Master Power Macro To Operate Master Power MacroTo Operate the Device Key Macro Using Channel ScanClearing a Macro To Program the Device Key MacroAUX as 2nd AUD key SET 9 9 Programming Favorite Channel ScanRe-Assigning Device Keys AUX as 2nd CD key SET 9 9 CD AUX AUX as 2nd PVR keyProgramming Keymover Using KeymoverRestoring Factory Default Settings Restoring Keymoved Keys To Default SettingsFCC Compliance TroubleshootingAdditional Information Care and MaintenanceLimited Lifetime Warranty Instalación de las Baterías IntroducciónCaracterísticas y Funciones Funciones de las Teclas De Encendido Maestro en la tecla PowerTecla DE Controla Estos Dispositivos Tabla de DispositivosProgramación de un Dispositivo Aparato Búsqueda de su Código Programación de un Aparato CombinadoPara controlar un aparato combinado TV/DVD Verificación de los Códigos Uso de la Función AprendizajePrecauciones sobre la Función Aprendizaje Programación de una Tecla de Aprendizaje Cambio del Bloqueo del VolumenBorrar Funciones de las Teclas de Aprendizaje Programación de un Macro de Canal Favorito Uso de los MacrosProgramación de Un Macro en una Tecla de Dispositivo Uso del Macro de Encendido Maestro en la Tecla PowerPara Programar el Macro de Encendido Maestro en la Tecla Uso del Macro de Tecla de Dispositivo Uso de la Exploración de CanalesBorrar un Macro Para Programar el Macro de Tecla de DispositivoAUX como la 2a tecla AUD SET Programación de una Exploración de Canales FavoritosReasignación de las Teclas de Dispositivos AUX como la 2a tecla CD SET CD AUX AUX como la 2a tecla PVRRestauración de Todas las Teclas Mudadas en un Solo Modo Uso de la Función KeymoverProgramación de la Función Keymover Restauración de una Sola Tecla MudadaLocalización de Fallas Restauración de los Valores Fijados en la FábricaInformación Adicional Conformidad con la FCCCuidado y Mantenimiento Garantía Limitada durante la Vida Útil del Producto Page Convertidores Digitales AudioDTV Converters Récepteurs TV numériquesPlasma VCRs / MagnétoscopesDVD / Lecteurs DVD PVRs DVRs

URC8820N specifications

The One for All URC8820N is an innovative universal remote control designed to simplify the operation of multiple devices in your home entertainment setup. This remote control is a significant solution for households that use various electronic devices, allowing users to manage them conveniently from a single control interface. Its versatility and ease of use make it a popular choice among consumers looking for streamlined functionality.

One of the standout features of the URC8820N is its capability to operate up to eight different devices, including televisions, DVD and Blu-ray players, digital cable boxes, satellite receivers, and even gaming consoles. This comprehensive compatibility ensures that users can replace multiple remotes with a single device, eliminating clutter and confusion.

The URC8820N employs advanced infrared (IR) technology, enabling it to communicate effectively with other devices. Most televisions and gadgets operate using IR signals, and the One for All URC8820N is programmed to recognize the commands needed for various brands and types of devices, ensuring a seamless user experience. Setting up the remote is a simple process, often accomplished through a straightforward setup guide or via online resources provided by One for All.

Another essential characteristic of the URC8820N is its user-friendly layout. The remote features a well-designed button configuration that allows users to easily navigate their devices without confusion. Key functions are clearly labeled, making it intuitive for individuals of all ages to operate.

The One for All URC8820N also incorporates advanced features such as the ability to learn commands from other remotes. This learning function enables the remote to adapt to specific user preferences, ensuring that common commands are readily accessible. Additionally, the remote is equipped with a powerful battery life, often lasting for several months with regular use, ensuring that users do not have to constantly change batteries.

Overall, the One for All URC8820N is an ideal solution for anyone looking to simplify their home entertainment experience. With its capability to control multiple devices, user-friendly design, learning function, and reliable durability, it stands out as a must-have accessory for modern households.
Top Page Image Contents