JVC AV 65WP74, AV 56WP74, AV 48WP74 manual Initial Setup, Auto Tuner Setup, Channel Summary

Initial Setup

Auto Tuner Setup

The auto tuner setup function is described on page 20 as the interactive plug-in menu. If you need to run the auto tuner setup again, follow the steps below.

Press the MENU button π† To AUTO TUNER SETUP

è To operate

è To choose CABLE or AIR Press the OK button to start

Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the message PROGRAMMING OVER! appears onscreen.

Press the Menu button when finished

Channel Summary

Channel summary allows you to customize the line-up of channels received by your TV. You can add or delete channels from the line-up or prevent any unauthorized viewers from watching any or all 181 channels.

Press the MENU button π† To CHANNEL SUMMARY

è To operate

The Channel summary screen will now be displayed with the channels set to scan marked with an “”. You can delete channels from the scan by removing the “”. If any

channels were missed during auto tuner setup and you wish

to add them, you may by placing an “” next to the channel number.

π†√® To the SCAN column

Press the OK button to include or delete from scan

Press the MENU button when finished

You can block access to a channel by activating the channel lock.

Press the MENU button

π† To CHANNEL SUMMARY

è To operate

π†√® To the Lock Column ( )

Press the ZERO button to lock or unlock that channel Press the MENU button when finished

28