JVC LX-D1000 instruction manual Assembly

Fig. 3 ASSEMBLY

	y Ceiling plate
!3Washers (for M10)
!2Nut
t 2 screws [A]
(M4 × 12)
u Inner pole	q Coupling
!84 hexagon socket	plate
bolts (M5 × 16)
i Inner pole
fixing plate

@04 nuts (for M5)

!94 washers (for M5)

o4 hexagon socket

bolts (M5 × 10)

(*) Fastening bolts for body’s plate (4 bolts)

Air inlet (❈)

LCD projector

!42 screws [B] (M8 × 14)

!72 rotary mini	Fig. 3-1		20	10
setscrews (M5 × 5)
!1Hexagon head bolts	150	(109.6)
[C] (M10 × 65)
!3Washer (for M10)
!0Collar			(109.6)
			150
		Size of fixing hole of base metal fixtures

r2 rotary setscrews [E] (M5 × 10)

e4 assembling bolts (M8 × 25)

	!5Hexagon wrench
Body’s plate	(accessory)

(*) Holder plates (2 plates)

Hexagon socket bolts

(*) Fastening bolts forfor M5 holder plate (8 bolts)

wSupporter for LCD projector

Unit of indicated dimensions (mm)

WARNING

Note:

❈Air inlet:

This is an inlet to bring cool air into the LCD projector. Do not cover it with a lid, etc.

(*) Parts

:The asterisked parts such as the holder plates (2 plates), fastening bolts for holder plates (8 bolts), and fastening bolts for body’s plate (4 bolts) are built in to constitute component parts of the body’s plate.

:Never remove the above-mentioned component parts under any circumstances since they are absolutely required to ensure safety.

Fig. 4 FRONT VIEW

Exhaust hole (❈)

Note:

Unit of indicated dimension (mm)

24❈ Exhaust hole:

This is a hole to exhaust hot air inside the LCD projector. When installing the unit near a wall, etc., keep it away more than 50 cm or so from the face of the exhaust hole.

– 3 –