Check and Make Sure

CAUTION: When installing component parts, caution must be exercised not to use any parts except the ones packed with the body.

Check and confirm before assembly and/or installation that the following parts are packed along with the body as accessories:

No.	Names of parts	Quantity

q	Coupling plate	1

w	Supporter for LCD projector	1

e	Assembling bolts (M8 × 25)	4

r	Rotary setscrews [E] (M5 × 10)	2

t	Screws [A] (M4 × 12)	2

y	Ceiling plate	1

u	Inner pole	1

i	Inner pole fixing plate	1

o	Hexagon socket bolts (M5 × 10)	4

!0	Collar	1

No.		Names of parts	Quantity

!1	Hexagon head bolts [C] (M10 × 65)		1

!2	Nut		1

!3	Washers (for M10)		2

!4	Screws [B] (M8 × 14)		2

!5	Hexagon wrench (for M5)		1

!6	Hexagon wrench (for M8)		1

!7	Rotary mini setscrews (M5 × 5)		2

!8	Hexagon socket bolts (M5 × 16)		4

!9	Washers (for M5)		4

@0	Nuts (for M5)		4

PROCEDURES FOR ASSEMBLY AND INSTALLATION (Refer to Fig. 3)

1. To begin with, determine the projection range, then the fixing posi- tion of the metal fixtures’ ceiling plate. (The projection lens center of the ceiling plate is apart about 24 mm from that of the LCD projector. Refer to Fig. 4)

2. Install the ceiling plate underneath the ceiling as illustrated in Fig. 3. For the size of the metal fixtures’ fixing hole, refer to Fig. 3-1. Use the fixing screw of the ceiling plate larger than M8.

WARNING: Check and make certain that there is a safety rate of more than 5 for the total mass of the metal fixtures including the LCD projector.

3. Turn the LCD projector over, and loosen only the angle adjuster lo- cated at the position illustrated in the figure. See Fig. 1. (At this time, take the sponge out from between the angle adjuster and the body.)

4. Set the body’s plate to the LCD projector, and slide it in the direction indicated by the arrow mark. See Fig. 2.

5. Insert the 2 screws [A] into the two holes provided at the bottom of the LCD projector, and tighten the angle adjuster. (See Fig. 2 and Fig. 3)

6. Set the supporter for the LCD projector from the bottom, tighten the screws [B], and secure the supporter.

7. Set the inner pole fixing plate and the inner pole temporarily with 4 hexagon socket bolts (M5 × 10) as illustrated in Fig. 3, and insert the inner pole into the hole of the coupling plate.

8. Fix the inner pole fixing plate and the coupling plate with 4 hexagon socket bolts (M5 × 16), and tighten them with 4 nuts (for M4).

9. Adjust the holes of the inner pole and the ceiling plate, put on the collar, washer, and nut in the order as shown in Fig. 3, and fasten them with a hexagon bolt [C].

10. Make adjustments on the rotating direction of the entire body of the metal fixtures, and then tighten the 4 hexagon socket bolts (M5 ×

10) that were temporarily fixed as mentioned in Procedure 7 above.

11.Tighten the inner pole using 2 rotary setscrews [E], and furthermore secure the inner pole using 2 rotary mini screws.

Fig. 1

(Bottom view of LCD projector)

Loosen this portion of the angle adjuster counterclockwise.

Fig. 2

tScrews [A] (M4 × 12)

Body’s plate

Angle adjuster

Slide

(*)Fastening bolt to install arm (1 bolt)

WARNING

(*)Part

:The asterisked fastening bolt to install an arm (1 bolt) is built in to constitute a part of the body’s plate.

:Never remove the above-mentioned bolt under any circumstances since it is absolutely required to ensure safety.

– 2 –

LX-D1000 specifications

The JVC LX-D1000 is a sophisticated piece of audio equipment that has gained attention for its impressive blend of advanced features and cutting-edge technologies. Designed for audiophiles and enthusiasts alike, this model provides an unparalleled listening experience that caters to a variety of audio formats and applications.

One of the standout features of the LX-D1000 is its high-resolution audio playback capability. The device supports various audio formats, including FLAC, ALAC, and DSD, ensuring that users can enjoy their music collection in the highest quality possible. This commitment to sound fidelity is complemented by a robust digital-to-analog converter (DAC), which enhances audio clarity and detail, allowing listeners to experience their favorite tracks as intended by the artists.

The LX-D1000 also boasts an intuitive user interface, offering seamless navigation through its various functions. The large display screen provides users with easy access to track information and settings, streamlining the listening experience. Furthermore, the device is equipped with smart connectivity options, including Bluetooth, Wi-Fi, and Ethernet, enabling users to stream music directly from their mobile devices or access internet radio and popular streaming services.

In addition to its connectivity features, the JVC LX-D1000 incorporates advanced audio processing technologies. These include digital signal processing (DSP) capabilities that enhance sound staging and imaging. Users can customize their audio experience with a range of preset equalizer settings or create their own tailored sound profile.

The device is also designed with versatility in mind. Its compact and stylish design makes it a fitting choice for any home audio setup, while its robust build quality ensures longevity. The LX-D1000 can easily integrate into a variety of configurations, whether used as a standalone unit or as part of a larger multi-room audio system.

Overall, the JVC LX-D1000 stands out as a premium audio solution. With its high-resolution audio capabilities, user-friendly interface, advanced processing technologies, and versatile connectivity options, it caters to both casual listeners and dedicated audiophiles. This model not only delivers exceptional sound quality but also enhances the overall listening experience, making it a notable choice in the realm of home audio systems.