JVC HD-56FH97 manual Connecting to the Surround Amplifier, Connecting to an External Amplifier

Quick Setup

Connecting to the Surround Amplifier

(HD-56FH97, HD-61FH97, HD-70FH97, HD-56FN97, HD-61FN97, HD-70FN97 ONLY)

In multi-channel sound such as 5.1 channel, the speech characters are played back from the center speaker. A center speaker in a movie theater is set in back of the screen so it can recreate a conversation scene in the movie more naturally. By using your TV's speaker as the center speaker, you can obtain the same sound effect as in a movie theater in you home theater sound system.

Front Front Surround

TV Rear Panel

CENTER CHANNEL INPUT

CENTER CHANNEL OUTPUT

(VARIABLE OUTPUT)

1)Connect the Pin cable from the TV's CENTER CHANNEL INPUT terminal to the surround amplifier's CENTER CHANNEL OUTPUT terminal.

Note:

• Please read the benefit of this feature on page 56.

Connecting to an External Amplifier

S-VIDEO	VIDEO	R	L
MONITOR	AUDIO	R	L
/RECOUT
	OUTPUT

TV Rear Panel

SpeakerSpeaker

Amplifier

1)Connect a white cable from the LEFT AUDIO OUTPUT on the back of the TV to the LEFT AUDIO INPUT on the amplifier.

2)Connect a red cable from the RIGHT AUDIO OUTPUT on the back of the TV to the RIGHT AUDIO INPUT on the amplifier.

Notes:

•Refer to your amplifier’s manual for more information.

•You can use AUDIO OUTPUT for your home theater system.

•You can not output audio using the AUDIO OUTPUT under the following conditions:

1)When you have digital sound from an HDMI device connected to the HDMI 1 or HDMI 2 connection on the back of your TV. (See page 22).

2)When you have analog sound from a DVI device connected to the AUDIO IN "HDMI 1" connection. (See page 21).

19

Downloaded from www.Manualslib.com manuals search engine