SETUP AND CONNECTIONS
THE ADVANCED CONNECTION
TV, VCR, and DVD Player and Audio Amp.
After you have made your connections, program the TV to tune to the correct video input channel to see and hear audio and video from the attached component (VCR, DVD player, etc.). Program your TV as described in the “System Options
Cable or any alternate RF signal, such as a digital or analog
AB
TV
PHONE
JACK
OPTICAL |
DIGITAL |
Satellite dish antenna 
TOP OF CARD | |
FACE DOWN |
|
ACCESS CARD
and Preferences” section of this Manual.
How to view your DVD and VCR:
• To watch the VCR in this |
connection, press TV/ |
VIDEO on the remote |
control until the correct |
video input appears (in this |
TV
example, |
because the digital decoder |
ANT( 75 
)
DVD
Satelite IN
Cable or
AUDIO CENTER |
|
| OUT |
CHANNEL IN | R | L AUDIOVAR | |
|
ON | OFF | Y |
| VIDEO | Y |
|
| VIDEO |
|
|
|
|
|
| L/ | PB | L | L/ | PB | L |
| MONO | |||||
| MONO |
|
|
|
|
|
| AUDIO | PR | AUDIO | AUDIO | PR | AUDIO |
| R |
| R |
|
|
|
|
|
| R |
| R | |
| COLOR |
|
| COLOR |
| |
| STREAM |
|
| STREAM |
| |
|
| HD 1 |
| OUT | HD 2 |
|
| IN | IN |
| IN |
|
|
|
|
|
| AUDIO |
|
|
|
|
| OUT |
| Y | Cb | Cr | L | L |
|
|
| |||
COMPONENT VIDEO VIDEO | R | R | |||
|
| ||||
|
|
| OUT |
|
|
Audio amplifier with optical INPUT
TO
CENTER
SPEAKER
DIGITAL
Stereo VCR
is in the TV, not the VCR, |
you cannot record digital |
channels with this |
• To watch the DVD player |
in this connection, press |
TV/VIDEO on the remote |
control until the correct |
video input appears (in this |
example, |
Some cable systems may require a “conversion box.” If so, consult your cable company’s box tuning instructions for details.
VIDEO | AUDIO |
|
| L | R |
IN from ANT OUT to TV
CH 3 
IN
CH 4
OUT
Please Read Before Using the Digital Audio Out Jack
This TV’s optical digital output jack fully complies with the international standard governing this type of jack (IEC958), and is designed for connection to a Dolby Digital
17