GETTING ASSISTANCE
RUNNING THE INTERACTIVE SETUP
You should have completed the interactive setup the first time you plugged in your TV. However, if you need to access the interactive setup again, you can access it through the Assistance menu.
1.Press MENU on the remote control to access the main menu.
2.Select Assistance from the main menu.
3.Select Interactive Setup and follow the
RTN Help
1 Interactive Setup
2 Antenna info
3 Dish Pointing...
4 New Access Card
5 System Test
6
7 Upgrades...
The interactive setup process allows you to complete all steps or selectively skip steps.
The steps involved in the interactive setup include:
• Setting the time and date | • Specifying your satellite dish antenna type | ||
• | Searching for channels | • | Entering Zip Code |
• | Setting up speakers | • Running the Signal Meter | |
• Selecting an audio processor | • | Running the system test | |
Note that if you do not subscribe to DIRECTV® programming, you can select “Skip this step” for running the system test.
GETTING ANTENNA INFORMATION
The Antenna Info menu helps you measure the strength of all available TV channels. It will help you adjust any
To access the Antenna Info menu:
1.Press MENU to bring up the main menu.
2.Select Assistance.
3.Then select Antenna Info.
A dialog box reports the status of the signal search and lists channels that are being received or have been received from all
If you decide to subscribe to DIRECTV, we strongly recommend that you have the satellite system professionally installed.
Installation can be arranged through the dealer where the TV was purchased.
82