ELSA Cable manual Technical data, Appendix

Appendix 63

Appendix

Technical data

Technical data	ELSA MicroLink Cable
LAN interface	Ethernet IEEE 802.3, 10Base-T (Twisted Pair, RJ45, Node/Hub switch)
Cable TV interface	MCNS DOCSIS (ITU-T J.112, physical layer as per Annex A & Annex B, MAC as per Annex B)
	Socket:	F –socket (IEC169-2 connection via included adapter)
	Reception frequency band:	88 - 860 MHz
	Reception channel width:	6 MHz or 8 MHz
	Receiver level:	48 W – 78 dBµV
	Receiver modulation:	64QAM, 256QAM
	Receiver data rate:	30.34 Mbps (64QAM), 42.88 Mbps (256QAM)
	S/N ratio in receive direction:	> 21 dB (64 QAM)
		> 28 dB (256 QAM)
	Transmission frequency band:	5 – 42 MHz (5 – 65 MHz optional)
	Transmission channel width:	200 – 3200 kHz
	Transmission level:	85 – 122 dBµV
	Transmission modulation:	QPSK, 16QAM
	Transmission data rate:	0,32 – 5,12 Mbps (QPSK), 0,64 – 10,24 Mbps (16QAM)
	S/N ratio in transmit direction:	> 14 dB (Burst QPSK)
		> 20 dB (Burst 16QAM)
Network protocols	Bridge mode:	Bridging of all IEEE 802.3-based protocols
	IP router:	IP, TCP, ICMP, ARP, RIP-1, RIP-2, PROXY ARP, DHCP
Filter possibilities	Bridge mode:	Broadcast, multicast, destination MAC address,
		source MAC address, automatic filtering of local and
		remote stations
	IP router	TCP, UDP port filtering, source and destination net-
		work filter
IP masquerading	Internet access using a single IP address via IP address and port implementation, static/
(NAT/PAT)	dynamic IP address assignment via DHCP, masking of TCP, UDP, ICMP and FTP; DNS forward-
	ing; inverse masquerading for intranet IP services
Management	Cable network operator:	Via SNMP and TFTP (transfer of configuration files and
		firmware updates)
	User:	Via the cable TV network or LAN with TCP/IP, pass-
		word protection, ELSA LANconfig, SNMP, TFTP, telnet
Display/operation	LEDs for LAN and cable TV network status, factory-default button, reset button
Power supply	12 V AC with AC adapter for 230 V (US version: 110V), 10 VA
Ambient conditions	Temperature: 5 - 40°C, humidity: 0 - 80%, non-condensing
Dimensions and	Rugged metal case, LEDs on front panel, connections on rear panel;
design	Dimensions: 158 x 32 x 135 mm (W x H x D)

ELSA MicroLink Cable