Cisco Systems 6130 appendix Connections Connector Cisco Part Number, Cisco 3-to-3 Cables

78-10280-01 02/15/00 Cisco 6130 NI-2 DSLAM System Cables 3

Use these cables in systems having quad-port ATUC-1-4DMT modules installed in the chassis. Table 3-3 lists the Cisco 6130 NI-2 DSLAM backplane receptacles and the cable kit part number for three-to-three Champ cable connectors between the DSLAM and the CO facility MDF in an installation without a POTS splitter.

Table 3-3	Cisco Connectors and Part Number for 3-to-3 Cable Kit—DSLAM to MDF
	Connections
Connector			Cisco Part Number
DSLAM	Main Distribution Frame		Kit	Subassembly
J39, J40, J41	P4	(slots 1 to 6),	CAB-DSLAM 128-MDF	72-1765-01
	P5	(slots 7, 8, and 21 to 24),		(right cable)
	or P6 (slots 25 to 28)
J42, J43, J44	P1	(slots 13 to 18),		72-1720-01
	P2	(slots 19, 20, and 31 to 34),		(left cable)
	or P3 (slots 35 to 38)

Note When you use a three-to-three cable kit, see Table B-8 on page B-10 for port mapping information. Figure 3-3 shows the three-to-three cables.

Figure 3-3	Cisco 3-to-3 Cables
	Left cable
P3	J44
Slots 35 to 38
P2	J43
Slots 19, 20, 31 to 34
P1	J42

Slots 13 to 18

Right cable

P6	J39
Slots 25 to 28
P5	J40
Slots 7, 8, 21 to 24

P4

Slots 1 to 6

J41

23648

Cisco 6130 DSLAM with NI-2 User Guide 3-5