Agilent Technologies N3280A manual SOURce CURRent LEVel, LIMit POSitive, Mode mode, @list DELay

Language Dictionary - 6

Table 6-1. Subsystem Commands Syntax (continued)

[SOURce:] CURRent

[:LEVel]

[:IMMediate][:AMPLitude] <n>, (@list) Sets the output current (in current priority mode)

:TRIGgered [:AMPLitude] <n>, (@list) Sets the triggered output current (in current priority mode)

:LIMit [:POSitive]

[:IMMediate][:AMPLitude] <n>, (@list) :BWIDth <bandwidth> , (@list) :TRIGgered [:AMPLitude] <n>, (@list)

:MODE <mode>, (@list) DELay

[:TIME] <n>, (@list) :MODE <mode>, (@list)

FUNCtion

:MODE <mode>, (@list) VOLTage

:ALC

:BWIDth <bandwidth> , (@list)

[:LEVel]

Sets the current limit (in voltage priority mode) Sets the output compensation bandwidth

Sets the triggered current limit (in voltage priority mode) Sets the current trigger mode (FIXed STEP)

Sets the output settling delay time in Manual mode Sets the output settling delay mode (AUTO MANual )

Sets the output mode (VOLTage CURRent)

Sets the output compensation bandwidth

[:IMMediate][:AMPLitude] <n>, (@list)	Sets the output voltage (in voltage priority mode)
:TRIGgered [:AMPLitude] <n>, (@list)	Sets the triggered output voltage (in voltage priority mode)
:MODE <mode>, (@list)	Sets the voltage trigger mode (FIXed STEP)
:PROTection
[:STATe] <bool>, (@list)	Enables/disables overvoltage protection on the selected output
STATus
:OPERation
[:EVENt]? (@list)	Returns the value of the event register
:CONDition? (@list)	Returns the value of the condition register
:ENABle <n>, (@list)	Enables specific bits in the Event register
:NTRansition<n>, (@list)	Sets the Negative transition filter
:PTRansition<n>, (@list)	Sets the Positive transition filter
:PRESet	Presets all enable and transition registers to power-on
:QUEStionable
[:EVENt]? (@list)	Returns the value of the event register
:CONDition? (@list)	Returns the value of the condition register
:ENABle <n>, (@list)	Enables specific bits in the Event register
:NTRansition<n>, (@list)	Sets the Negative transition filter
:PTRansition<n>, (@list)	Sets the Positive transition filter
SYSTem
:ERRor?	Returns the error number and error string
:VERSion?	Returns the SCPI version number
TRIGger
:ACQuire
[:IMMediate]	Triggers the measurement immediately
:SOURce <source>	Sets the measurement trigger source (BUS EXTernal)
[:TRANsient]
[:IMMediate]	Triggers the output immediately
:SOURce <source>	Sets the output trigger source (BUS EXTernal)

NOTE: Some [optional] commands have been included for clarity. Refer to chapter 6 for a complete description of all programming commands.

55