Compex Systems DVR4-80 user manual Press

¾RS232/RS485 ID: This entry is used to assign each device its own ID code if more than one unit is used through the RS232/RS485 connection. There are two ID codes for the DVR: 001 or 002. The default is set to

001. To change this, simply use the arrow keys on the DVR which also represent the channel 1-4 keys (These are the top four buttons). Use the up and down arrow keys to make your selection.

: Press or to move the cursor to the left or right.

:Press or to change the value.

These keys are located at the top left row of keys (same keys as channel 1-4).

34